Aerospace
F-22 Raptor jet sets new record, 28 air-to-air missiles loaded & fired
#F-22 #Raptor breaks new record for most missiles loaded and fired
The 94th Fighter Squadron at Tyndall Air Force Base in Florida smashed the previous record for the most air-to-air missiles loaded and successfully fired by an F-22 Raptor.
28 air-to-air missiles valued at more than $14 million
As a cohesive team, the units employed 28 air-to-air missiles valued at more than $14 million during WSEP 22.12, deeming them the most successful unit to attend a WSEP thus far. They also demonstrated a high level of proficiency while shooting the F-22’s six-barrel, 20mm Gatling gun, and the M61A2 Vulcan at the Advanced Gunnery Target System.
The Lockheed Martin F-22 Raptor is an American single-seat, twin-engine, all-weather stealth tactical fighter aircraft produced for the US Air Force. Despite being designed as an air superiority fighter, the aircraft can also conduct ground assaults, engage in electronic combat, and gather signals intelligence. While Lockheed Martin, the F-22’s prime contractor, built the majority of the aircraft’s airframe and weapon systems and oversaw final assembly, Boeing provided the aircraft’s wings, aft fuselage, avionics integration, and training systems.
F 22 specifications
This aircraft can be operated by a single crew and has a wingspan of 44 feet, a height of 16 feet, and a length of 62 feet. Four 5,000-pound-capable underwing hardpoints are present on the F-22. At altitude, it can reach a top speed of Mach 2.25, or up to 2,414 km/h. It can fly at a height of 65,000 feet and has a combat range of 850 km and a ferry range of 3,220 km.
IAF to induct first batch of domestically built LCH at Jodhpur (Opens in a new browser tab)
The F-22 has a maximum altitude of 10 miles and is capable of sustained supersonic flight. Without using afterburners, the F-22 flies at a speed of above Mach 1.5 thanks to “Supercruise.” Even at high speeds, the F-22 Raptor can accelerate swiftly and make razor-sharp maneuvers.
Weapons aboard the F-22 fighter jet are primarily intended for use against airborne targets. It’s important to understand that the pilot can launch standoff attacks on ground targets. Lethal long-range air-to-air and air-to-ground armament are among the US F-22’s many strengths. The F-22 fighter uses stealth technology to operate almost radar-undetected.
10 Most Expensive Fighter Jets In The World(Opens in a new browser tab)
Only 195 aircraft had been built.
The fifth-generation fighter jet, the F-22, made its debut in 2005 after making its first flight on September 7, 1997. Owing to technological confidentially, the export of this aircraft was restricted. Additionally, the manufacture of this aircraft ceased in 2011 due to an expensive budget program. Despite this, Lockheed Martin improved its technology to keep up with the current generation of fighter jets. So far, only 195 aircraft had been constructed.
Aerospace
Indigo will soon launch Air Taxi Service in India
InterGlobe Enterprises, the parent brand of IndiGo, is set to revolutionize travel in India with its upcoming air taxi service.
Scheduled for a potential launch in 2026, this innovative venture promises a seamless journey for passengers between two bustling hubs. Delhi and Gurgaon in Haryana. The forthcoming service is projected to revolutionize the daily commute, offering passengers a swift aerial journey covering the distance in a mere 7 minutes.
This remarkable efficiency contrasts starkly with the conventional 90-minute drive, underscoring the immense time-saving potential for commuters. The anticipated fare, ranging from Rs 2,000-3,000, makes this innovative mode of transport not only swift but also remarkably competitive in pricing.
At the heart of this ambitious endeavor lies a strategic partnership with Archer Aviation, a pioneer in electric vertical takeoff and landing (eVTOL) aircraft technology. Under this collaboration, Archer will supply 200 state-of-the-art eVTOL aircraft, representing an investment of US$ 1 billion. These cutting-edge aircraft, capable of accommodating up to four passengers alongside the pilot, epitomize the future of sustainable air travel.
Powered by six battery packs, Archer’s eVTOL aircraft boast rapid charging capabilities, enabling a swift turnaround between flights. With a charging time of just 30-40 minutes, these eco-friendly aircraft ensure minimal downtime, maximizing operational efficiency.
Similar services are anticipated to be introduced by the joint venture in Bengaluru and Mumbai as well. Nevertheless, the service rollout period has not yet been made public by the company. Next year, it is anticipated to get its certification. Following this, the company will start the certification procedure with the Directorate General of Civil Aviation (DGCA).
Aerospace
Which is bigger 777x or 787 aircraft ?
The 777X is a new series of the Boeing 777 family and is designed to be larger and more efficient than its predecessor. It features two variants: the 777-8 and the 777-9, being the larger of the two.
The Boeing 777X emerges as the larger sibling within the Boeing family, representing a significant leap forward in both size and efficiency. Comprising two variants, the 777-8 and the 777-9, the latter takes the crown as the larger of the two. With its expansive fuselage and impressive wingspan, the 777X is tailored for long-range journeys and boasts a substantial passenger capacity.
On the other hand, the Boeing 787, affectionately known as the Dreamliner, occupies a niche in the market as a smaller yet formidable aircraft designed for medium to long-range flights. Its distinguishing feature lies in its composite fuselage, a technological marvel that renders it lighter and more fuel-efficient compared to conventional aluminum counterparts. The Boeing 777X is larger than the Boeing 787 aircraft.
When it comes to passenger capacity, the 777-9 reigns supreme, typically accommodating a sizeable contingent of 400-425 passengers in its standard configuration. In contrast, the 787, with its more modest dimensions, typically carries between 240-290 passengers, depending on the variant and layout.
One of the remarkable innovations introduced with the 777X is its folding wingtips, a feature designed to address the logistical challenges of accommodating such a large aircraft in conventional airport gates. These folding wingtips enable the 777X to retract its wings, allowing it to fit into gates designed for smaller aircraft while still reaping the benefits of an extended wingspan during flight, thereby enhancing fuel efficiency and operational flexibility
Aerospace
China Secures Production Certificate for Mass Production of Pilotless eVTOL Aircraft
The first passenger-carrying pilotless electric vertical takeoff and landing (eVTOL) aircraft in the world, the EH216-S, has received the Production Certificate for its eVTOL aircraft from the Civil Aviation Administration of China (CAAC).
This is a significant milestone for EHang Holdings Limited, the leading UAM technology platform company in the world. This outstanding accomplishment is another big step towards mass manufacturing for the eVTOL aircraft and the ensuing commercial operations, building on the ground-breaking acquisition of the Type Certificate and the Standard Airworthiness Certificate for the EH216-S.
The PC is a crucial certificate that the aircraft maker receives from the CAAC, the country’s aviation authority. By obtaining this certificate, EHang has demonstrated that it has set up a quality management system for mass production that satisfies the airworthiness regulation standards set forth by the CAAC, and the company has been given permission to continue producing mass quantities.
It is also a strong guarantee of the calibre of the goods made by EHang. Raw materials, supplier management, manufacturing organisation, production quality control, aircraft pre-delivery test, after-sales repair and maintenance, etc. are all included in the mass production quality management system for the EH216-S.
To ensure that every aircraft and its components that roll off the production line strictly adhere to the approved type design and safety requirements, the system sets clear guidelines and documentation for every step in the production procedure. This ensures comprehensive traceability and safety control.