Aviation
Qantas test flight from London to Sydney nonstop takes off
- 2 of 3 Project Sunrise research flights to reduce jetlag and design optimum crew rest and work pattern
- Builds on learnings from New York-Sydney service last month
- ‘Supper at breakfast time’ among changes to on-board service to help passengers adjust to new timezone
- Almost 100 years to the day that the first London to Australia flight operated
Australia’s national carrier is preparing for its second ultra-long haul research flight, as part of scientific studies into minimising jetlag for passengers and improving crew wellbeing.
Aviation Industry CTO’S Issue Joint Call to Action to Deliver Sustainable Aviation Plans
The first research flight operated between New York and Sydney non-stop four weeks ago with 49 passengers and crew. It cut around three hours off the typical gate-to-gate travel time of current one-stop flights.
The airline has re-purposed the delivery flights of three brand new 787 Dreamliner aircraft, which would otherwise ferry empty from Seattle to Australia. A third research flight, repeating the New York-Sydney route, will take place in December.
Boeing and Ethiopian airlines responses on Flight 302 crash.
Tomorrow’s flight marks only the second time in history that a commercial airline has flown direct from London to Sydney. The first was 30 years ago in 1989, when Qantas operated a 747-400 ferry flight between the two cities. The aircraft that performed that flight (VH-OJA) is now on public display at an aviation museum, south of Sydney.
THE GULFSTREAM G700 SETS INTERNATIONAL CITY-PAIR SPEED RECORDS FOR THE FIRST TIME.
Researchers from the University of Sydney’s Charles Perkins Centre as well as the Cooperative Research Centre for Alertness, Safety and Productivity (Alertness CRC) will again travel on the non-stop Dreamliner flight to collect passenger and crew data.
United Airlines fined $1.9 million for long ground delays
The findings from all three research flights will be used to inform future service and product design, aimed at increasing wellbeing and comfort during travel on long-haul flights – in particular the direct flights Qantas hopes to operate on a commercial basis between the east coast of Australia and London and New York.
Project Sunrise Research Flight #2 – London to Sydney
The research flight will carry around 50 passengers and crew in order to give the 787-9 the range required for the 17,800 km flight, expected to take around 19 and a half hours.
While the flight is over 1,500 kilometers further than New York to Sydney, the duration is expected to be similar due to prevailing tail winds between London and Sydney.
Qantas preparing flights, New Zealand opens skies for Australia
All carbon emissions from the research flights will be offset. Qantas recently announced an acceleration of its efforts to reduce its broader carbon footprint, including effectively doubling current levels of flight offsetting, capping carbon emissions from 2020 onwards and totally eliminate net emissions by the year 2050. (link to environment press release)
Flight fast facts
- QF 7879 flight from London to Sydney will take around 19-and-a-half hours subject to wind and weather conditions on the day. Distance between London and Sydney is 17,800 kilometres (11,000 miles). This compares to a travel time of 22 hours and 35 minutes on the current London to Sydney via Singapore flight.
- The flight will be operated by a brand-new Boeing 787-9 with a special Qantas Centenary livery, registration VH ZNJ, named “Longreach”.
- Four pilots will be on rotation throughout the flight. Two additional pilots will be in the cabin, having flown the aircraft to London.
- The route will depart London and overfly 11 countries including England, Netherlands, Germany, Poland, Belarus, Russia, Kazakhstan, China, Philippines and Indonesia before crossing the Australian coast near Darwin, tracking across the country before descending into Sydney.
- The aircraft will operate with a maximum fuel load of approx. 126,000 litres. Projected fuel remaining upon landing is approximately 7,500 litres which translates to about 100 minutes of flight time.
- Maximum take-off weight for a 787-9 is 254,000kg. QF 7879 LHR to SYD will depart at 233,000kg take-off weight with the same amount of fuel that Qantas departs Perth to London flights with.
- Flight will travel at 85% the speed of sound which is around 930 kilometres an hour. Cruising altitude will start at 35,000 feet and then as the aircraft weight reduces with fuel burn, the cruising altitude will increase to 40,000 feet.
Southwest Airlines jet engine ‘explosion’ leaves woman dead
Airlines
Air India to Launch aircraft maintenance training institute in Bengaluru
Air India, one of India’s leading global airlines, is set to establish a Basic Maintenance Training Organization (BMTO) in Bengaluru.
This institute will offer a comprehensive Aircraft Maintenance Engineering (AME) program certified by the Directorate General of Civil Aviation (DGCA). The program will follow an integrated 2+2 year structure, combining classroom learning with practical, hands-on training.
This initiative is part of Air India’s broader goal of creating a robust aviation ecosystem in India. With plans to expand its fleet and strengthen its operations, the airline aims to build a skilled workforce of maintenance engineers, making the organization self-reliant while supporting its ambitious transformation journey.
This country tops visa rejections in the popular Schengen countries
To bring this vision to life, air india has partnered with Bengaluru Airport City Limited (BACL), a subsidiary of Bangalore International Airport Limited (BIAL). Together, they will develop a state-of-the-art facility spanning 86,000 square feet at Bengaluru Airport City.
This purpose-built campus will feature modern classrooms, well-equipped laboratories, and qualified trainers to deliver world-class education and training. The institute is expected to become operational by mid-2026.
The BMTO will be located close to Air India’s new 12-bay Maintenance, Repair, and Overhaul (MRO) facility, also set to open in Bengaluru by early 2026. The AME program will begin with two years of academic coursework, followed by two years of practical training at the MRO, ensuring students receive hands-on experience adhering to industry standards.
Sanctions & Engine Issues Ground Half of Russia’s A320neo fleet
In the meantime, Air India has introduced a Cadet AME program in collaboration with reputable institutions in Bengaluru and Hyderabad.
This ensures continuity in its commitment to developing skilled aircraft maintenance engineers while the BMTO facility is under construction. The program also allows students to pursue a bachelor’s degree through university partnerships, enhancing their career and academic opportunities.
With this initiative, air india plane aims to address the growing demand for skilled professionals in aircraft maintenance and engineering, air india new planes contributing to the development of India’s aviation sector and creating specialized career paths for aspiring engineers.
-
Aviation2 months ago
Microsoft Flight Simulator Raises $3 Million to Bring Back the An-225 Mriya
-
Airlines2 months ago
Qatar Citizens Can Travel to the United States Without a Visa
-
Aviation2 months ago
Qatar Airways bans these new Electronic Devices on plane
-
Airlines2 months ago
Japan Airlines Rolls Out Free Domestic Flights to International Passengers
-
Defence2 months ago
Which Country Has the Largest Fleet of Fighter Aircraft?
-
Airport2 months ago
Western Sydney Airport Welcomes Its First Plane After 6 Years of construction
-
Travel2 months ago
Qatar Airways Launches Four Additional Flights from Amsterdam
-
Aviation2 months ago
Did you know ? Once Boeing 747 carried 1088 passenger in 1991