Aerospace
Czech Republic selected the Embraer C-390 Millennium as its next military aircraft
Prague, Czech Republic, October 16, 2023 – The Ministry of Defense and Armed Forces of the Czech Republic announced today the start of negotiations on the potential acquisition of the new-generation multi-mission Embraer C-390 Millennium, a military transport aircraft.
The decision to start negotiating towards the possible purchase of the C-390 was based on a market assessment and analysis prepared by the Czech Republic’s Ministry of Defense, which identified the C-390 as the most suitable solution for meeting the requirements of the Army of the Czech Republic.
Czech Republic intends to acquire two aircraft that will significantly increase its airlift capacity, allowing the Czech Army to perform missions such as air transport, air assault operations, aerial resupply, medical evacuation, humanitarian aid, air-to-air refueling, and firefighting with these aircraft. Furthermore, the C-390 Millennium requires significantly less maintenance than other aircraft, which translates into higher availability and lower life-cycle costs.
“We are honored to be selected by the Ministry of Defense and Armed Forces to start negotiating on this significant acquisition and we are ready to provide the most advanced medium transport aircraft available in the market to the Czech Republic”, said Bosco da Costa Junior, President and CEO, Embraer Defense & Security. “The C-390 Millennium is drawing the attention of several nations around the world due to its unbeatable combination of high productivity and operating flexibility with low operating costs.”
Negotiations have started with the objective of prospective signing an acquisition contract for two aircraft and associated support, which includes a complete training solution for pilots, loadmasters, and technicians, spare parts, and a robust entry-into-operation plan with a local presence of Embraer personnel in country for an initial period.
Following this announcement, the Czech Republic becomes the sixth nation and fourth NATO country in Europe to prefer the C-390 after Brazil, Portugal, Hungary, the Netherlands, and Austria. The C-390 is redefining military airlift and challenging the thinking behind current and future generation platforms, with multi-mission capability and interoperability built by design.
Since entering operation with the Brazilian Air Force in 2019, the C-390 has proven its capacity, reliability, and performance. The current fleet of 6 aircraft has shown an operational availability of around 80%, with a mission completion rate above 99%, demonstrating exceptional productivity in the category.
Czech Republic is an active partner in the development and production of the C-390 Millennium, and today´s announcement will strengthen Embraer´s cooperation with local industries. Czech company Aero Vodochody is already a strategic partner and supplier for the program, producing parts of the rear fuselage, the doors for paratroopers and crew, the emergency door and hatches, the cargo ramp, and the fixed leading edge.
The C-390 can carry more payload (26 tons) compared to other medium-sized military transport aircraft and flies faster (470 knots) and farther, being capable of performing a wide range of missions such as transporting and dropping cargo and troops, medical evacuation, search and rescue, firefighting, and humanitarian missions, operating on temporary or unpaved runways such as packed earth, soil, and gravel. The aircraft configured with air-to-air refueling equipment, with the designation KC-390, has already proven its aerial refueling capacity both as a tanker and as a receiver, in this case by receiving fuel from another KC-390 using pods installed under the wings.
Aerospace
Boeing’s Aurora Flight Sciences Expands Columbus Plant by 50,000 Sqft
Aurora Flight Sciences, a subsidiary of Boeing, has launched a significant expansion of its manufacturing facility near the Golden Triangle Regional Airport in Columbus, Mississippi.
This ambitious project will add 50,000 square feet of new space, renovate 40,000 square feet of the existing facility, and introduce advanced automation equipment, robotics, and non-destructive inspection technologies. mcas boeing enhancements will support the growing demand for Aurora’s aerospace systems business.
Since its establishment, Aurora Mississippi has specialized in the production of advanced composite components and assemblies for both military and commercial aircraft. The company first opened in 2005 at Mississippi State University’s Raspet Flight Research Laboratory in Starkville before relocating to its current site in Columbus two years later.
Initially occupying 21,000 square feet, the facility has since grown to encompass over 120,000 square feet, featuring cutting-edge manufacturing technologies such as automated fiber placement. Aurora’s latest expansion is a strategic investment aimed at increasing production capacity for composite components like boeing titanium used in executive jets and the MQ-25TM Stingray composite skins, a key project for its parent company, Boeing.
Additionally, the facility will produce components for NASA’s X-66 sustainable flight demonstrator aircraft, further diversifying its portfolio. Currently employing around 100 full-time staff in Mississippi, Aurora plans to hire more than 60 additional team members by the end of 2025.
Aurora’s expansion project underscores its commitment to Mississippi’s growing aerospace and advanced manufacturing sector. The company maintains strong partnerships with Mississippi State University (MSU) and East Mississippi Community College (EMCC), contributing to research, higher education, and workforce development in advanced manufacturing.
Additionally, Aurora actively supports local K-12 STEM education through summer camps and collaborates with high school vocational education programs. The expansion and renovation project will be carried out in phases over the next two years, with completion expected by 2026. This development marks a significant milestone in Aurora’s ongoing growth and its role in advancing aerospace manufacturing in Mississippi.
- Travel2 months ago
Air India to Expand US Operations with Three New Routes After a Decade
- Aviation2 weeks ago
New EU Carry-On Rules Begin September 2024: What to Expect
- Airlines2 months ago
Air India Rolls Out A350s for Delhi-New York JFK and Newark Routes
- Travel2 months ago
Why We Should Avoid These Stamps in a Passport
- Airport2 months ago
Top 10 Largest Airports in the World by Size
- Aviation4 weeks ago
Meet WindRunner: The World’s Heaviest and Largest Aircraft Ever Built
- Aviation1 month ago
Comac C919 Moves Closer to Securing EU Certification with EASA
- Aviation2 months ago
Inside Look: Our First Demo Flight of the C-390 at Farnborough Airshow 2024