Connect with us

Aerospace

First made-in-china large commercial aircraft , C919 rolled off production line.

First made-in-china large commercial aircraft , C919 rolled off production line.

The Commercial Aircraft Corp of China (Comac) said on Monday it had rolled out its C919 narrow body jet, which is meant to rival similar models from Airbus Group and Boeing Co.

State television also showed footage of the aircraft rolling off the assembly line in Comac’s Shanghai factory. In a statement, the company said it had already received 517 orders for the aircraft mainly from domestic firms.

Advertisement

 About C919

“C919″is the short form of trunk liner code for “COMAC919”. COMAC is the acronym of the Commercial Aircraft Corporation of China, Ltd. The letter “C” is the first letter of both “COMAC” and “China”. It indicates that this trunk liner program is the will of China and her people. It is a short-medium range commercial trunk liner that can claim indigenous intellectual property. Its all-economy class layout entails 168 seats, and the hybrid class layout 156 seats. The basic version is designed to cover a range of 4,075 km, while the enhanced version can stretch to 5,555 km. Such designs may satisfy the operating demands for different routes. Its economic life is designed to be 90,000 flying hours/30 calendar years.

Advertisement

 Features 

Safety:

Advertisement

The design, development, and airworthiness examination of the airplane are completely based on international civil aviation rules and regulations and airworthiness standards.
Economics:

Fuel consumption and direct operating cost per seat per kilometer are lower than those of similar existing airplanes.
Comfort:

Advertisement

Broader cabins and wider seats plus advanced system technology to improve comfort.

Environmentally friendly:

Advertisement

New engine to meet noise and pollutant discharge requirements.

Product family:

Advertisement

Covering basic version, extended version, shortened version, cargo version, special version and corporate version.

The Comac C919 is a family of 158-174 seat narrow-body twin-engine jet airliners built by the Commercial Aircraft Corporation of China (Comac). It is the largest commercial airliner designed and built in China since the defunct Shanghai Y-10. Its first flight is expected to take place in end of 2015, with first deliveries scheduled for late 2018.

Advertisement

Dimensions

Dimensions of the C919 are very similar to the Airbus A320, possibly to allow for a common pallet to be used. Its fuselage will be 3.96 metres (13 feet) wide, and 4.166 metres (13 feet, 8 inches) high, producing a cross-section of 12.915 square metres (139 square feet). The wingspan will be 33.6 metres (110 feet, 3 inches), or 35.4 metres (116 feet, 3 inches) if winglets are included.

Advertisement

Payload

Payload will be 20.4 metric tonnes. Its cruise speed will be Mach 0.785 and it will have a maximum altitude of 12,100 metres (39,800 feet).

Advertisement

capacity 

There will be two variants. The standard version will have a range of 4,075 km (2,200nm), with the extended-range version able to fly 5,555 km (3,000nm).

Advertisement

According to a film shown by Comac at the 2010 Zhuhai Airshow, the company plans to build six different models of the aircraft: a base passenger aircraft with 168 seats, as well as stretched and shrunk passenger versions, business jet and freighter models, and a type designated only as “special” .

Price tag 

Advertisement

The Comac C919 is intended to be a new entrant in the commercial airliner market specifically targeted at low-cost airlines. Fuel price increases are especially damaging to the low-cost flying model, leading these airlines to renew their fleets frequently. This ensures optimal fuel performance and reliability across a single-type fleet. Direct competitor – Boeing 737 unit cost of US$ 78.3-108.3 million, means that target price for this airplane should be lower. The Airbus A320 has a wider price range, from US$71.9 million to US$120.5 million. The Comac developers have not announced a price tag for each plane, although based on industry speculation current orders for 2012 could be worth more than US$26 billion. This with 2012 orders for 380 examples, lead to projected average price of about $68 million.

Total no of orders 517 (as of 2015)

Advertisement

At the 2015 Paris Air Show, Ping An Leasing signed a letter of intent for 50 C919s.This deals makes the Shanghai-based Chinese lessor one of Comac’s largest customers. In addition to Ping An Leasing, Puren Group also signed a letters of intent for seven C919s and seven ARJ21s, intended for the start-up Puren Airlines.Also during that time Nepal Airlines and Air India was interested in acquiring 2-3 to replace older aircraft.

Design and assembly of the aircraft  done in Shanghai, using foreign-made jet engines and avionics. However, China has expressed its desire to produce a domestically made engine for the C919. The center wing box, outer wing box, wing panels, flaps and ailerons are planned to be built in Xi’an, China. The center fuselage sections are planned to be built in Hongdu, China.The airframe will be made largely of aluminium alloy, while the center wing box also makes use of carbonfiber composites.

Advertisement

CFM International will supply a version of the LEAP engine, the LEAP-1C, to power the aircraft. The engine’s nacelle, thrust reverser and exhaust system will be provided by Nexcelle, with such features as an advanced inlet configuration, the extensive use of composites and acoustic treatment and an electrically operated thrust reverser. Michelin will supply Air X radial tyres.

Dimensions

Advertisement

Dimensions of the C919 are very similar to the Airbus A320, possibly to allow for a common pallet to be used. Its fuselage will be 3.96 metres (13 feet) wide, and 4.166 metres (13 feet, 8 inches) high, producing a cross-section of 12.915 square metres (139 square feet). The wingspan will be 33.6 metres (110 feet, 3 inches), or 35.4 metres (116 feet, 3 inches) if winglets are included.

Payload

Advertisement

Payload will be 20.4 metric tonnes. Its cruise speed will be Mach 0.785 and it will have a maximum altitude of 12,100 metres (39,800 feet).

capacity 

Advertisement

There will be two variants. The standard version will have a range of 4,075 km (2,200nm), with the extended-range version able to fly 5,555 km (3,000nm).

According to a film shown by Comac at the 2010 Zhuhai Airshow, the company plans to build six different models of the aircraft: a base passenger aircraft with 168 seats, as well as stretched and shrunk passenger versions, business jet and freighter models, and a type designated only as “special”.

Advertisement

Liked it ..?

Share with your friends and family  

Advertisement

He is an aviation journalist and the founder of Jetline Marvel. Dawal gained a comprehensive understanding of the commercial aviation industry.  He has worked in a range of roles for more than 9 years in the aviation and aerospace industry. He has written more than 1700 articles in the aerospace industry. When he was 19 years old, he received a national award for his general innovations and holds the patent. He completed two postgraduate degrees simultaneously, one in Aerospace and the other in Management. Additionally, he authored nearly six textbooks on aviation and aerospace tailored for students in various educational institutions. jetlinem4(at)gmail.com

Aerospace

Indigo will soon launch Air Taxi Service in India

Indigo will soon launch Air Taxi Service in India
Image:Archer Aviation

InterGlobe Enterprises, the parent brand of IndiGo, is set to revolutionize travel in India with its upcoming air taxi service.

Scheduled for a potential launch in 2026, this innovative venture promises a seamless journey for passengers between two bustling hubs. Delhi and Gurgaon in Haryana. The forthcoming service is projected to revolutionize the daily commute, offering passengers a swift aerial journey covering the distance in a mere 7 minutes.

Advertisement

This remarkable efficiency contrasts starkly with the conventional 90-minute drive, underscoring the immense time-saving potential for commuters. The anticipated fare, ranging from Rs 2,000-3,000, makes this innovative mode of transport not only swift but also remarkably competitive in pricing.

At the heart of this ambitious endeavor lies a strategic partnership with Archer Aviation, a pioneer in electric vertical takeoff and landing (eVTOL) aircraft technology. Under this collaboration, Archer will supply 200 state-of-the-art eVTOL aircraft, representing an investment of US$ 1 billion. These cutting-edge aircraft, capable of accommodating up to four passengers alongside the pilot, epitomize the future of sustainable air travel.

Advertisement

Powered by six battery packs, Archer’s eVTOL aircraft boast rapid charging capabilities, enabling a swift turnaround between flights. With a charging time of just 30-40 minutes, these eco-friendly aircraft ensure minimal downtime, maximizing operational efficiency.

Similar services are anticipated to be introduced by the joint venture in Bengaluru and Mumbai as well. Nevertheless, the service rollout period has not yet been made public by the company. Next year, it is anticipated to get its certification. Following this, the company will start the certification procedure with the Directorate General of Civil Aviation (DGCA).

Advertisement
Continue Reading

Aerospace

Which is bigger 777x or 787 aircraft ?

Which is bigger 777x or 787 aircraft ?

The 777X is a new series of the Boeing 777 family and is designed to be larger and more efficient than its predecessor. It features two variants: the 777-8 and the 777-9, being the larger of the two.

The Boeing 777X emerges as the larger sibling within the Boeing family, representing a significant leap forward in both size and efficiency. Comprising two variants, the 777-8 and the 777-9, the latter takes the crown as the larger of the two. With its expansive fuselage and impressive wingspan, the 777X is tailored for long-range journeys and boasts a substantial passenger capacity.

Advertisement

On the other hand, the Boeing 787, affectionately known as the Dreamliner, occupies a niche in the market as a smaller yet formidable aircraft designed for medium to long-range flights. Its distinguishing feature lies in its composite fuselage, a technological marvel that renders it lighter and more fuel-efficient compared to conventional aluminum counterparts. The Boeing 777X is larger than the Boeing 787 aircraft.

When it comes to passenger capacity, the 777-9 reigns supreme, typically accommodating a sizeable contingent of 400-425 passengers in its standard configuration. In contrast, the 787, with its more modest dimensions, typically carries between 240-290 passengers, depending on the variant and layout.

Advertisement

One of the remarkable innovations introduced with the 777X is its folding wingtips, a feature designed to address the logistical challenges of accommodating such a large aircraft in conventional airport gates. These folding wingtips enable the 777X to retract its wings, allowing it to fit into gates designed for smaller aircraft while still reaping the benefits of an extended wingspan during flight, thereby enhancing fuel efficiency and operational flexibility

Advertisement
Continue Reading

Aerospace

China Secures Production Certificate for Mass Production of Pilotless eVTOL Aircraft

China Secures Production Certificate for Mass Production of Pilotless eVTOL Aircraft
EHang

The first passenger-carrying pilotless electric vertical takeoff and landing (eVTOL) aircraft in the world, the EH216-S, has received the Production Certificate for its eVTOL aircraft from the Civil Aviation Administration of China (CAAC).

This is a significant milestone for EHang Holdings Limited, the leading UAM technology platform company in the world. This outstanding accomplishment is another big step towards mass manufacturing for the eVTOL aircraft and the ensuing commercial operations, building on the ground-breaking acquisition of the Type Certificate and the Standard Airworthiness Certificate for the EH216-S.

Advertisement

The PC is a crucial certificate that the aircraft maker receives from the CAAC, the country’s aviation authority. By obtaining this certificate, EHang has demonstrated that it has set up a quality management system for mass production that satisfies the airworthiness regulation standards set forth by the CAAC, and the company has been given permission to continue producing mass quantities.

It is also a strong guarantee of the calibre of the goods made by EHang. Raw materials, supplier management, manufacturing organisation, production quality control, aircraft pre-delivery test, after-sales repair and maintenance, etc. are all included in the mass production quality management system for the EH216-S.

Advertisement

To ensure that every aircraft and its components that roll off the production line strictly adhere to the approved type design and safety requirements, the system sets clear guidelines and documentation for every step in the production procedure. This ensures comprehensive traceability and safety control.

Advertisement
Continue Reading
Advertisement

Advertisement

Trending