Aerospace

SABRE a rocket engine designed to power aircraft directly into space..!

Airbus has confirmed that it will work with France, Germany, and Spain to build the Future Combat Air System (FCAS).

SABRE (Synergistic Air-Breathing Rocket Engine) is a concept under development by Reaction Engines Limited for a hypersonic precooled hybrid air breathing rocket engine.

The engine has been designed to achieve single-stage-to-orbit capability, propelling the proposed Skylon launch vehicle. SABRE is an evolution of Alan Bond’s series of liquid air cycle engine (LACE) and LACE-like designs that started in the early/mid-1980s for the HOTOL project.

The design comprises a single combined cycle rocket engine with two modes of operation. The air breathing mode combines a turbo-compressor with a lightweight airprecooler positioned just behind the inlet cone. At high speeds this precooler cools the hot, ram-compressed air leading to an unusually high pressure ratio within the engine.

The compressed air is subsequently fed into the rocket combustion chamber where it is ignited with stored liquid hydrogen. The high pressure ratio allows the engine to continue to provide high thrust at very high speeds and altitudes. The low temperature of the air permits light alloy construction to be employed which gives a very lightweight engine—essential for reaching orbit. In addition, unlike the LACE concept, SABRE’s precooler does not liquefy the air letting it run more efficiently.

After shutting the inlet cone off at Mach 5.14, 28.5 km altitude, the system continues as aclosed cycle high performance rocket engine burning liquid oxygen and liquid hydrogen from on-board fuel tanks, potentially allowing a hybrid spaceplane concept like Skylon to reach orbital velocity after leaving the atmosphere on a steep climb.

An engine derived from the SABRE concept called Scimitar has been designed for the company’s A2 hypersonic passenger jet proposal for the European Union-funded LAPCAT study.

ANA Announces New Star Wars™ Themed C-3PO(Opens in a new browser tab)

In November 2012, Reaction Engines announced it had successfully concluded a series of tests that proved the cooling technology of the engine, one of the main obstacles towards the completion of the project. The European Space Agency (ESA) has evaluated the SABRE engine’s pre-cooler heat exchanger and accepted claims that the technologies required to proceed with the engine’s development had been fully demonstrated.

As of July 2013, the United Kingdom has earmarked £60 million for the development of a full-scale prototype of the SABRE engine, citing the viability of its core technologies based on testing performed by the ESA.

As of June 2015, SABRE’s development continues with The Advanced Nozzle Project in Westcott, UK. The test engine, operated by Airborne Engineering Ltd, is being used to analyze the aerodynamics and performance of the advanced nozzles that the SABRE engine will use, in addition to new manufacturing technologies such as the 3D-printed propellant injection system.

Source: Wikipedia. Pictures: Reaction engines Ltd.

Liked it..!?
Share with your friends and Family

Aerospace

Indigo will soon launch Air Taxi Service in India

Image:Archer Aviation

InterGlobe Enterprises, the parent brand of IndiGo, is set to revolutionize travel in India with its upcoming air taxi service.

Scheduled for a potential launch in 2026, this innovative venture promises a seamless journey for passengers between two bustling hubs. Delhi and Gurgaon in Haryana. The forthcoming service is projected to revolutionize the daily commute, offering passengers a swift aerial journey covering the distance in a mere 7 minutes.

This remarkable efficiency contrasts starkly with the conventional 90-minute drive, underscoring the immense time-saving potential for commuters. The anticipated fare, ranging from Rs 2,000-3,000, makes this innovative mode of transport not only swift but also remarkably competitive in pricing.

At the heart of this ambitious endeavor lies a strategic partnership with Archer Aviation, a pioneer in electric vertical takeoff and landing (eVTOL) aircraft technology. Under this collaboration, Archer will supply 200 state-of-the-art eVTOL aircraft, representing an investment of US$ 1 billion. These cutting-edge aircraft, capable of accommodating up to four passengers alongside the pilot, epitomize the future of sustainable air travel.

Powered by six battery packs, Archer’s eVTOL aircraft boast rapid charging capabilities, enabling a swift turnaround between flights. With a charging time of just 30-40 minutes, these eco-friendly aircraft ensure minimal downtime, maximizing operational efficiency.

Similar services are anticipated to be introduced by the joint venture in Bengaluru and Mumbai as well. Nevertheless, the service rollout period has not yet been made public by the company. Next year, it is anticipated to get its certification. Following this, the company will start the certification procedure with the Directorate General of Civil Aviation (DGCA).

Aerospace

Which is bigger 777x or 787 aircraft ?

The 777X is a new series of the Boeing 777 family and is designed to be larger and more efficient than its predecessor. It features two variants: the 777-8 and the 777-9, being the larger of the two.

The Boeing 777X emerges as the larger sibling within the Boeing family, representing a significant leap forward in both size and efficiency. Comprising two variants, the 777-8 and the 777-9, the latter takes the crown as the larger of the two. With its expansive fuselage and impressive wingspan, the 777X is tailored for long-range journeys and boasts a substantial passenger capacity.

On the other hand, the Boeing 787, affectionately known as the Dreamliner, occupies a niche in the market as a smaller yet formidable aircraft designed for medium to long-range flights. Its distinguishing feature lies in its composite fuselage, a technological marvel that renders it lighter and more fuel-efficient compared to conventional aluminum counterparts. The Boeing 777X is larger than the Boeing 787 aircraft.

When it comes to passenger capacity, the 777-9 reigns supreme, typically accommodating a sizeable contingent of 400-425 passengers in its standard configuration. In contrast, the 787, with its more modest dimensions, typically carries between 240-290 passengers, depending on the variant and layout.

One of the remarkable innovations introduced with the 777X is its folding wingtips, a feature designed to address the logistical challenges of accommodating such a large aircraft in conventional airport gates. These folding wingtips enable the 777X to retract its wings, allowing it to fit into gates designed for smaller aircraft while still reaping the benefits of an extended wingspan during flight, thereby enhancing fuel efficiency and operational flexibility

Aerospace

China Secures Production Certificate for Mass Production of Pilotless eVTOL Aircraft

EHang

The first passenger-carrying pilotless electric vertical takeoff and landing (eVTOL) aircraft in the world, the EH216-S, has received the Production Certificate for its eVTOL aircraft from the Civil Aviation Administration of China (CAAC).

This is a significant milestone for EHang Holdings Limited, the leading UAM technology platform company in the world. This outstanding accomplishment is another big step towards mass manufacturing for the eVTOL aircraft and the ensuing commercial operations, building on the ground-breaking acquisition of the Type Certificate and the Standard Airworthiness Certificate for the EH216-S.

The PC is a crucial certificate that the aircraft maker receives from the CAAC, the country’s aviation authority. By obtaining this certificate, EHang has demonstrated that it has set up a quality management system for mass production that satisfies the airworthiness regulation standards set forth by the CAAC, and the company has been given permission to continue producing mass quantities.

It is also a strong guarantee of the calibre of the goods made by EHang. Raw materials, supplier management, manufacturing organisation, production quality control, aircraft pre-delivery test, after-sales repair and maintenance, etc. are all included in the mass production quality management system for the EH216-S.

To ensure that every aircraft and its components that roll off the production line strictly adhere to the approved type design and safety requirements, the system sets clear guidelines and documentation for every step in the production procedure. This ensures comprehensive traceability and safety control.